Step 1

Check rough opening radius. Radius must be 3" at cutout (use 6" diameter circle for gauge). 3" is the only radius size available and must measure 3" at cutout. Note: mitered corners are available.

Step 2

If rough openings are cut full size, hold heavy paper or cardboard over rough opening (foam board backer is helpful).

Step 3

Trace rough opening onto template material using narrow line marker.

Step 4

While material is over rough opening, mark the following on template:
  1. Inside or outside
  2. Top
  3. Window location (On side windows mark the forward end.)
  4. Specify wall thickness, frame finish, type of glass and what model window.
  5. If the window is a sliding window mark which end slides and if a screen is needed.
  6. Customer name

Step 5

Package templates and mail to:

Wynne Marine LLC
P.O. Box 445
775 Mississippi Street
Tuscumbia, AL 35674

Remember to Check the Following Before Placing Your Order

  • Did you mark all of the necessary information on your template before packaging it?
  • Did you remember to put YOUR NAME on the package?
Your order could be delayed if you do not complete all ordering information before submitting your order.